File Name: README.TXT
             Date: Sept 21, 1992

        =================================================================

       REQUIREMENTS

    These  drivers  will  work  with  either  512K  or 1Mbyte of accelerator
    memory.  With 512K,  16 colors will be displayed.  On 1Mbyte boards, 256
    colors are displayed.

    For 800x600 operation the  8514  ULTRA  ROM  version must be 11330111330
    (v1.3) or newer. Please  contact  ATI  Customer  Support for ROM upgrade
    details. The  ROM  version  label  is  displayed  in  the boot banner on
    system  startup.  This  does  not  apply  to  the Graphics ULTRA/VANTAGE
    products.


        INSTALLING WINDOWS 3.1 DRIVERS

        1)   Make  sure you have installed Windows 3.1 on your  hard disk
             prior to using these drivers. Windows MUST be  installed and
             functioning in order to make use of these drivers.
     
        2)   Run SETUP.  This can be  done from  the DOS  prompt  in your
             Windows directory or from within Windows.

        3)   Select display.

        4)   Select your desired resolution.   Below is a list of drivers
             supplied and  the  resolutions  supported.  In  the process,
             SETUP  may  ask  for a  `Windows Disk'.  You MUST insert the
             Microsoft   Windows  diskette  that SETUP  asks for and  you
             MUST specify a path of A: or B: for this disk.

             ATI Win 3.1 ULTRA 1024x768  16/256 Normal
             ATI Win 3.1 ULTRA 1024x768  16/256 Small
             ATI Win 3.1 ULTRA 800x600   16/256
             ATI Win 3.1 ULTRA 640x480   16/256
             ATI Win 3.1 ULTRA 1280x1024 16
             ATI Win 3.1 ULTRA 1024x768  Crystal

        5)   Setup will copy the necessary files to your hard disk and
             upon completion, will drop back to the DOS prompt or prompt
             you to restart Windows (depending from where you ran SETUP).

        6)   Run Windows!


        INSTALLING WINDOWS 3.1 DRIVERS ON A NETWORK

        1)   Make  sure Windows 3.1  has been installed  on  your network
             prior to using these drivers. Windows MUST be  installed and
             functioning in order to make use of these drivers.
     
        2)   Run SETUP.  This must be done from  the DOS  prompt  in your
             personal  Windows directory  NOT the main network directory.
             You must run SETUP from DOS and NOT within Windows.

        3)   Select display.

        4)   Select your desired resolution.   Below is a list of drivers
             supplied and  the  resolutions  supported.

             ATI Win 3.1 ULTRA 1024x768  16/256 Normal
             ATI Win 3.1 ULTRA 1024x768  16/256 Small
             ATI Win 3.1 ULTRA 800x600   16/256
             ATI Win 3.1 ULTRA 640x480   16/256
             ATI Win 3.1 ULTRA 1280x1024 16
             ATI Win 3.1 ULTRA 1024x768  Crystal

        5)   Setup  will  make an  adjustment  to it's configuration  and
             upon completion drop back to DOS.

        6)   Run Windows!


        For assistance install the Windows 3.1 drivers, please call ATI
        Customer Support.

                     ATI Customer Support  (416) 756-0711
                                      FAX  (416) 756-0720
                                      BBS  (416) 756-4591

        For a printout of this information, type

                TYPE README.TXT > LPT1